Power Integral

Power Integral

Power Integral met logoStable solution for thin walled tube cutting

The thick body and thinned cutting area of the Power Integral saw blade provide a low friction coefficient and reduced cutting resistance combined with higher strength. This enables these saw blades to be used for extremely demanding applications, like fast cutting of thin walled products.

 

Advantages:

  • Best solution for cutting stainless steel tubes
  • Minimizes tube spinning and deformation
  • Improves yields, especially important when cutting expensive materials
  • Low vibration level

Applications:

  • Thin walled (stainless) steel tubes, brass/copper
  • Suggested cutting speed: 60 – 180 m/min
  • Feed: 0,02 – 0,16 mm/tooth
  • Machines: manual, semi-automatic, automatic


Typical application examples:

Material Type of
steel
Dimensions
(mm)
Material
specs.
Tensile
strength
(N/mm2)
Cutting
speed
(m/min)
Tooth  load
(mm/tooth)
Cutting
time
(sec)
Blade  life
(cuts)
Blade life
(m2)
Tube  soft steel 89 x 2,0 S275 380 120  0,05 / 0,12 3,5 4.000 1,8
Tube  stainless 40 x 2,0 1.4301 380 42 0,03 / 0,06 5,8 9.000 2,1
Tube  stainless 50 x 1,5 1.4512 430 180 0,03 /0,06 1,6 9.000 2,1